3. Next, take the Seat Piece and again, the numbers (3 to 3, 4 to 4). Hand tighten 4 Screws
into the Pre-Drilled holes. If done correctly the current assembly should look like this.
4. Finally, with the last 4 screws take the Back-Support pieces and match the numbers
aligning the pre-drilled holes with the Arm/Leg Piece. Hand tighten only.
Note: Be sure
to use the pre-drilled holes!
.
5. Now that you have all the Pieces and Screws in, go back with the tightening tool
and secure the screws. This should pull everything together and create a beautiful and
sturdy Bamboo Bench.
Important Note: Do Not tighten the bolts until you have all of them in place. Use the Pre-
Drilled holes and hand tighten to hold its place.
Thank you for Your Business!
Any questions?
Call us at
1-800-574-7248
