O P E R AT I O N S
Prodigy is
heating up 90%
TIMER
MASTER FX
Prodigy is Ready
To Fog
TIMER
MASTER FX
2.) Using the rocker switch, turn power to “on”. The OLED screen will read “Welcome to the Prodigy”
(A) and the heat up process will begin. Please allow 5-7 minutes for the machine to reach operating
temperature before proceeding, your progress will be available by percentage on control screen (B). When
the screen reads “Prodigy is Ready to Fog” (C), you are ready to begin.
3.) Before proceeding, it is important to understand what each button and setting does. Please see the
diagram below for button layout. To open settings, hit the menu button, scroll using the Up/Down arrows,
and save your setting by pressing enter.
1.) Place the Prodigy on a flat surface with at least 6 inches of open space around machine to allow for
proper cooling. To avoid machine damage, remove 4 liter container before filling.
Use Master FX fluids
only (Visit MasterFX.com to explore various types of densities and hang times). Once full, return container
to machine and use quick connect to attach hose. Next, connect the Neutrik Powercon TRUE1 to proper
power supply. To determine suitable power requirements, please refer to the power ratings label on the
back of your machine.
SERIES
5
Welcome to the
Prodigy
TIMER
MASTER FX
TIMER
MENU
UP
DOWN
ENTER
A
B
C
Содержание prodigy
Страница 1: ...U S E R M A N U A L...
