Master Forge 503217 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 20

Master Forge 503217 Скачать руководство пользователя страница 15

15

Lowes.com/masterforge

®

ASSEMBLY INSTRUCTIONS
15. Check the distance between the

ignition pin and the burner ports

If the distance between the ignition pin and

the burner ports is not the same as

illustrated, loosen the ignition pin screws,

adjust the distance and then re-tighten the

screws.

16. Install knob

Install three knobs (M) onto the

valve stems on firebox and hood

assembly (A) and one knob (M) onto

the valve stem on left side burner

table (H) and tighten them. Make

sure all knobs are positioned to OFF.

17. Install heat tent

Insert heat tents (C) over each burner

inside the firebox and hood assembly

(A). Direct the tabbed end of heat

tent (C) toward front of grill,

observing slots in front of firebox

and hood assembly (A) that align

with tabs on heat tent (C). Insert tabs

into slots in firebox and hood

assembly (A). Allow back side of

heat tent (C) to rest on the V-shaped

support mounted on the back

side of the firebox and hood

assembly (A).

«
...
13
14
15
16
17
...
»

Содержание 503217





















Отзывы:

Нет отзывов