Master-force 241-0424, Руководство оператора

Страница: 11 / 16

11
OPERATION
TO ATTACH BATTERY PACk (Fig. 2)
1. Lock the trigger switch on the
impact wrench by placing the
direction of rotation (forward/
reverse/ center lock) selector in
center position.
2. Align the raised rib on the battery
pack with the grooves of the
wrench, and then attach the
battery pack to the wrench.
NOTE : Make sure that the latch on the battery pack snaps into place and that
the battery pack is secured to the tool before beginning operation.
TO DETACH BATTERY PACk (Fig. 2)
1. Lock the trigger switch on the impact wrench by placing the direction of
rotation (forward/ reverse/ center lock) selector in center position.
2. Depress the battery release buttons located on the both sides of the
battery pack to release the battery pack.
3. Pull the battery pack out and remove it from the tool.
CAUTION!
when placing the battery pack in the tool, be sure that the raised
rib on battery pack aligns with the groove inside the wrench and that the latches
snap into place properly. Improper attachment of the battery pack can cause
damage to internal components.
WARNING! Battery tools are always in operating condition. Therefore, the
direction-of-rotation selector should always be locked when not in use or car-
rying at your side.
TRIGGER SWITCH (Fig. 3a)
To turn the Impact Wrench ON,
depress the trigger switch. To turn it
OFF, release the trigger switch.
VARIABLE SPEED (Fig.3a)
The variable-speed trigger switch
delivers higher speed with increased
trigger pressure and lower speed
with decreased trigger pressure.
Fig. 2
Fig. 3a
Direction
of rotation
selector
Variable
speed
trigger
switch