Master-force 241-0405, Руководство оператора

Страница: 5 / 20

Page 4
SAFETy INSTRUCTIONS
WARNING:
Read all safety
warnings and instructions!
Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury . Save all warnings and
instructions for future reference .
The “term power tool” in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool .
WARNING:
Risk of fire and
electric shock. Dry location use only. Do
not expose to rain. Risk of injury.
WORk AREA SAFETy
1 . keep work area clean and well lit.
Cluttered or dark areas invite accidents .
2 .
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power
tools create sparks that may ignite the dust
or fumes .
3 .
keep children and bystanders away
while operating a power tool.
Distractions
can cause you to lose control .
ELECTRICAL SAFETy
1 .
Power tool plugs must match the
outlet. Never modify the plug in any way .
Do not use any adapter plugs with earthed
(grounded) power tools . Unmodified plugs
and matching outlets will reduce risk of
electric shock .
2 .
Avoid body contact with earthed
or grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There
is an increased risk of electric shock if your
body is earthed or grounded .
3 .
Do not expose power tools to rain or
wet conditions. Water entering a power tool
will increase the risk of electric shock .
4 .
Do not abuse the cord.
Never use the
cord for carrying, pulling or unplugging the
power tool . Keep the cord away from heat,
oil, sharp edges or moving parts . Damaged
or entangled cords increase the risk of
electric shock .
5 .
When operating a power tool outdoors,
use an extension cord suitable for outdoor
use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock .
6 .
If operating a power tool in a damp
location is unavoidable, use a ground
fault circuit interrupter (GFCI) protected
supply.
Use of a GFCI reduces the risk of
electric shock .
PERSONAL SAFETy
1 . Stay alert, watch what you are doing
and use common sense when operating a
power tool.
Do not use the tool while tired
or under the influence of drugs, alcohol, or
medication . A moment of inattention while
operating power tools may result in serious
personal injury .
2 . U
se personal protective equipment.
Always wear eye protection . Protective
equipment, such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection,
used for appropriate conditions, will reduce
personal injuries .
3 .
Prevent unintentional starting. Ensure
that the switch is in the off-position before
connecting to power source and/or battery
pack, picking up, or carrying the tool .
Carrying power tools with your finger on the
switch or energizing power tools that have
the switch on invites accidents .
4 .
Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part of the
power tool may result in personal injury .
5 .
Do not overreach. Keep proper
footing and balance at all times . This
enables better control of the power tool in
unexpected situations .