Master cook LGG09-0019, Руководство пользователя

Страница: 10 / 13

GAS HOOK-UP
Only the hose assembly supplied with the grill should be
used. Any hose assembly must be specified by the grill
manufacturer.
This is a liquid propane configured grill.
Do not attempt to use a natural gas supply.
Total gas consumption (per hour) of this grill with
burners on “MAX”: 11,500 btu/hr
The 20lb. cylinder must be provided with a shut off valve
terminating in an LP gas supply cylinder valve outlet
specified, as applicable, for connection type QCC1 is the
standard for compressed gas cylinder valve outlet and
inlet connection
. ANSI/CSA-V-1
The cylinder supply system must be arranged for vapor
withdrawal. The cylinder must include a collar to protect
the cylinder valve.
Other cylinders may be acceptable for use with the
appliance provided they are compatible with the appliance
retention means.
A dented or rusty LP Gas Cylinder may be hazardous and
should be checked by your LP supplier. Never use a
cylinder with a damaged valve. The LP gas cylinder must
be constructed and marked in accordance with the
specifications for LP - Gas Cylinders of the U.S Department
of Transportation (D.O.T.) or the National Standard of
Canada, , Cylinders, Spheres and Tubes
for Transportation of Dangerous Goods; and Commission,
as applicable.
CAN/CSA-B339
LP GAS CYLINDER REQUIREMENTS
(20LB. CYLINDER)
Main Man ifold operating pressure: 11” water column
(W.C.)/2.74kPa.
LP Gas Cylinder must be fitted with Overfill Prevention
Device (OPD).
Ensure that the black plastic grommets on the LP cylinder
valve are in place and that the hose does not come into
contact with the grease tray or the grill head.
Your grill is equipped with gas supply orifices for use only
with liquid propane gas. It is also equipped with a high
capacity hose assembly for connection to a standard 20lb.
LP cylinder (18-1/4” high, 12-1/4” diameter).
Make sure cylinder valve is in its full off position (turn
clockwise to stop).
2. Check cylinder valve to ensure it has proper external
male threads (type 1 connection per ). ANSIZ21.81
3. Make sure all burner valves are in the OFF position.
4. Inspect valve connections, port and hose assembly.
Look for any damage or debris. Remove any debris.
Inspect hose for damage. Never attempt to use
damaged or obstructed equipment. See your local LP
gas dealer for repair.
When connecting hose assembly to the valve, hand
tighten the nut clockwise to a complete stop. Do not
use a wrench to tighten. Use of a wrench may damage
the quick coupling nut and result in a hazardous
condition.
6. Open the cylinder valve fully (counterclockwise). Use
a soapy water solution to check all connections for
leaks before attempting to light the grill. See below. If
a leak is found, turn the cylinder valve off and do not
use the grill until a local LP gas dealer can make
repairs.
LP GAS HOOK-UP
CONNECTION
TO CONNECT THE LP GAS SUPPLY CYLINDER
9
1.
5.