Main External Parts of Mixer
①
Label
②
Stirring shaft
③
Stainless bowl
④
Base
⑤
Connecting knob
⑥
Speed control switch
⑦
Power switch (may choose the fitting):
A.
Normal switch
B.
Electromagnetic switch
⑧
Power cord
Operation Instruction
①
Standard power supply v/ HzAc. (Please use a plug with 3 wide
contacts and good grounding.)
②
Installation of stirrer: Loosen connecting knob 5 of head. Raise head and fix it.
Place stirrer on stirring shaft and turn it 45
°
in counter clockwise direction.
③
Installation of stainless bowl: Place stainless bowl on bowl seat and turn bowl to
fix it.
④
Starting Procedures: After material are filled in, lower the head and tighten
connecting knob 5. Turn speed control switch to lowest speed and turn on power
switch 7, then set required speed gradually ager stirrer is in normal operation.
⑤
Shutting down: when the operation is complete, turn the speed control switch to
the lowest speed firstly, then turn off the power switch and finally disconnect
power supply.
Содержание 18mcfm5qlb
Страница 5: ......
