TF2115701-MC-00 Eng Page 8 of 19 20161205-Ver.4
6.
PRESS and continually HOLD down push
button of safety valve while slowly turning ON
the regulator control valve. Continually hold
down the push button of the safety valve. DO
NOT stand with head or arms over cooker.
7.
After burner is lit, continue to HOLD the push
button for 10 seconds and then release.
Holding push button of safety valve for less
than 10 seconds will cause burner flame to go
out.
8.
If ignition does not occur in 5 seconds, turn the regulator and LP tank valve off, wait 5 minutes, and repeat
the lighting procedure.
9.
Check the position of thermocouple, make
sure the flame has full contact with the
thermocouple.
Note: If thermocouple does not have full
contact with flame, unit will not stay lit.
10.
Cycle time for timer is around 15 minutes. If the timer is not reset within around 15 minutes, the burner will
shut OFF automatically. If this occurs, please follow lighting instructions and continue to cook.
Push button of
safety valve
Turn on
regulator
control valve
HOLD the
Push button
of safety
valve
