Model no. 043-2743-8 | Contact us: 1-855-803-9313
5
4
TM
Notes on the cord plug (for the polarized plug only):
Notes on the cord:
This appliance has a polarized plug. To reduce the risk of electric shock, this plug is
intended to fit into a polarized outlet only one way. If plug does not fit fully into
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician, Do
not attempt to modify the plug in any way.
a) A short power-supply cord (or detached power-supply cord) is to be provided to
reduce risks resulting from becoming entangled in or tripping over a long cord.
b) Longer detachable power-supply cords or extension cords are available and may
be used if care is exercised in their use.
c) If a long detachable power-supply cords or extension cord is used,
1) The marked electrical rating of the detachable power-supply cord or extension
cord should be at least as great as the electrical rating of the appliance.
2) If the appliance is of the grounded type, the extension cord should be a
grounding-type 3-wire cord. (for the grounding plug only)
3) The longer cord should be arranged so that it will not drape over the counter top
or table top where it can be pulled on by children or tripped over unintentionally.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
KNOW YOUR CORDLESS KETTLE
Switch
Handle cover
Body bottom cover
Base
Glass body
Handle
Lid button
Lid
USING YOUR CORDLESS KETTLE
4. Plug in the kettle. Push the switch down to boil. The light in the kettle will illuminate until the
boiling is completed.
5. After the boiling is completed, unplug the kettle. Lift the kettle from the power base and then
pour the water.
NOTE:
Do not fill the water over the maximum level, as water may spill out of
NOTE:
NO
Ensure the lid is firmly closed. The kettle will spout water if the lid is left
open.
NOTE:
Use caution when pouring the water from your kettle as boiling water
NOTE:
NO
Do not pull the lid when you are pressing the lid button.
NOTE:
NO
Ensure the power supply is turned off when kettle is not in use.
Before initial use
Operation
If you are using the kettle for the first time, it is recommended that you clean your kettle before use
by boiling a full kettle of water twice and then discarding the water.
1. Slot the cable around the tabs underneath the power base. Fit the power cable firmly into the
base slot, so it’s stable.
2. To fill water into the kettle: remove the kettle from the power base and open the lid by pressing
down on the lid button. Fill kettle with the desired amount of water. Always fill the kettle between
the minimum (0.5 L) and maximum (1.2 L) marks. Too little water will result in the kettle
switching off before the water is boiled.
3. Close the lid. Position the kettle on the power base in place. Make sure the kettle contacts the
power base completely.
6. The kettle may be stored on the power base when not in use.
the spout when boiling. Ensure that the lid is firmly in place before connecting
the power cord to the outlet.
may result in scalding. Plus, do not open the lid while the water in the
kettle is still hot.
