Master Audio
DSPSeries - MUS - Ver 1.1 ENG
Nov 10
17
frequency and slope have to be configured manually in the Xover Menu in each
Output menu.
Note
: The configuration mode configures the input sources when selected. The user
can change the source afterwards if desired. It does not keep the configuration in
memory.
6.3.4.Copy - Copy channels
Copy Channels from the source to the target. When the Source and Targets are both
Inputs and Outputs, all audio parameters will be copied. When one of the Source or
the Target is an input while the other is an output, only the Level, Polarity, Delay and
EQ are copied.
•
SOURCE
- Channel to be copied from.
•
TARGET
- Channel to be copied to.
6.3.5.General - General system parameters
•
FREQ MODE
- Selects the frequency control mode for EQ and crossover filters.
Can be 36 steps/octave or All Frequencies (1 Hz resolution).
•
DELAY UNIT
- ms, ft or m.
6.3.6.Comm – Communication Settings
•
BAUD RATE
– Sets the baud rate of serial communication. Default is 115200bps.
SOURCE:In1
SYSTEM Copy
TARGET:In2
SYSTEM Copy
FREQ MODE:36/Oct
SYSTEM Generl
DELAY UNIT:ms
SYSTEM Generl
BAUD RATE:115200
SYSTEM Comm
