07
08
Alternating current
Direct current
Diode
Continuity
Auto range
Maximum display
Minimum display
Low battery
Percentage (duty cycle)
Hertz, kilohertz (frequency)
Millivolts, volts (voltage)
Micro amps, milliamps, amps (current)
Nanofarad, microfarad, millifarad (capacitance)
Ohms, kilaohms, megaohms
Relative display
AUTO
MAX
MIN
%
Hz, kHz
mV, V
REL
Ω, kΩ, MΩ
nF, μF, mF
μA, mA, A
3. Specifications
Instrument should be calibrated annually at 18°C~28°C
and relative humidity of <75%.
NCV
Non-contact voltage detection
USB interface active
Auto power off
3.1 General Specifications
3.1.1 Auto and manual range
3.1.2 Full range overload protection
3.1.3 Max. voltage between terminal and
ground: 600V DC or AC rms
3.1.4 Operating altitude: 2000m max.
3.1.5 Display: 6600 count LCD
3.1.6 Polarity indication: automatically displays “-”
3.1.7 Over range indication: “OL” or “-OL”
3.1.8 Sample rate: approx. 0.4s/analog bar
graph: approx. 0.04s
except for current measurement: approx.
1s/bar graph: 0.1s
3.1.9 Unit display: functions and unit power
3.1.10 Auto power off time: approx. 15 min.
3.1.11 Power supply: 9V battery
3.1.12 Low battery indication: display shows“ ”
3.1.13 Temp. coefficient: less than 0.1 x accuracy/°C
3.1.14 Operating temperature: 0~40°C
3.1.15 Storage temperature: -10~50°C
3.1.16 Dimensions: 180x86x52mm
3.1.17 Weight: approx. 250g (without battery)
