circuit under test.
1.2.9 When carrying out measurements
on TV or switching power circuits
always remember that there may be
high amplitude voltages pulses at
test points, which can damage the
meter.
1.2.10 Never perform resistance,
capacitance, inductance, diode and
continuity measurements on live
circuits.
1.2.11 Never perform capacitance
measurements unless the capacitor
to be measured has been
discharged fully.
1.2.12 Never use the meter under the
condition of the explosive air, steam
or dirt.
1.2.13 If any faults or abnormalities are
observed, the meter can not be
used any more and it has to be
checked out.
1.2.14 Never use the meter unless the
rear case is in place and fastened
fully.
4 Digital Multimeter
Содержание MS8201H
