KTM DUKE 250/390
Assembly instruction for muffler guard slider type
Calle 76 # 52D - 74 / Telefax: (57+4) 448 8428 / Medellín - Colombia
www.mastechno.com
After the installation of the parts, please check that they are aligned and that all the hardware is properly tightened
Note :
Do not �ghten the screws un�l they are completely aligned with the holes.
Before the installa�on, please verify through the manual that all pieces and parts are
complete.
Tools Required:
Hex Allen Wrench Set
Cup wrench kit
Parts Included:
Assembled Kit
Installa�on
1- Remove the screw indicated on the image
1
Can�dad:
1
Can�dad:
2- Install the guard using the screws included in the kit like
indicated on the scheme
Aluminium bush
Plas�c �p
slider
1
Can�dad:
Socket screw
M8 x 110
DEXT 1” DINT 10
ALT. 60
1
Can�dad:
Washer M8
