Umbaubericht
Lokomotiven
Pict.-2: New soldered cleaning motor cable
Assemble completely cleaning porch.
Remove propulsion unit from the chassis (Remove 4 screws from the brackets.)
Rebuild the propulsion unit for the 4. (yellow) cable
Basics:_Digital_compatible_gears/en
Cut the 4 light roof cables, light rear, jack and the 3 cables to the slider porch from the base PCB.
Remove base PCB complete.
Plug the rest of the 3 gear cables of XL-decoder on the propulsion unit and assemble the gear.
Assemble the XL-decoder and relais on the lead weight.
Connect cable like Pict. 3:
Connection plan
Gear cable on M+(green) , G+(brown) , G-(white) , M-(yellow).
Cable of slider porch “+”(white) , LV(brown) , Relais contact(green).
Light rear on “+” and “LH”.
Relais coil on “+” and “F3” (Follow the polarity of diode).
Second relais contact on “-” .
While the old jack is not protected against reversal polarity, the cable will be removed completely.
Stand 15.04.2020
Seite 2 / 4
