13
3.7 Anschluss SUSI/Massoth-Bus
An diesen 4 poligen SUSI Stecker kann
z.B. ein gepulster Verdampfer oder
Soundmodule nach SUSI-Norm ange-
schlossen werden. Die Programmierung
des Anschlusses entnehmen Sie Bitte
der Konfigurationsanleitung.
4. Technische Daten
Spannungsversorgung:
0-24 V DC/DCC
(kurzzeitig max. 27V)
Gesamtbelastbarkeit:
Max. 4A
Motorausgang:
Max. 3,5A, 70Hz-16KHz,
lastgeregelt, Digital und Analog
Lichtausgänge:
Max. je 0,6A, 22V
dimmbar
Funktionsausgänge 1 - 6:
Max. je 0,6A,
22V dimmbar (Max. 1,3A in Summe
aller Licht- und Funktionsausgänge)
Temperaturbereich:
-20 - +50°C
Abmessungen:
50 x 32 x 12 mm
(L x B x H)
Hinweis zur Temperatur: Um Kondens-
wasserbildung zu vermeiden benutzen
Sie die Elektronik bei Temperaturen
unter 0°C nur, wenn diese vorher aus
einem beheizten Raum kommt. Die
Eigenwärme des Fahrbetriebs reicht
aus um Kondenswasserbildung zu
verhindern.
3.7 Using the SUSI/Massoth bus
This 4-pole terminal may be used for
e.g. pulsed smoke generators or sound
modules in compliance with the SUSI
norm. Information about programming
this terminal are provided in the Configu
-
ration Manual.
4. Technical Data
Power supply:
0-24 V DC/DCC
(momentary max. 27V)
Total load:
Max. 4 Amps
Motor output:
Max. 3,5A, 70Hz-16KHz,
load controlled, digital and analog
Light outputs:
Max. 0,6A each, 22V
dimmable
Function outputs 1 - 6:
Max. 0,6A each,
22V dimmable
(Max. 1,3 Amps all light and function
outputs combined)
Temperature range:
-4°F - +122°F
Measurements:
50 x 32 x 12 mm
(L x W x H)
Note: In case you intend to utilize this de-
coder below freezing temperatures, make
sure it was stored in a heated environ-
ment before operation to prevent the
generation of condensed water. The heat
generated during operation is sufficient
to prevent condensed water.
991016_BDA_eMOTION_XL_2013_04_ML.indd 13
17.04.2013 12:03:15