MASSO G2 Скачать руководство пользователя страница 18

Страница: 18 / 477

MASSO

MASSO Documentation

There is no extra cost for using multiple software's on one MASSO controller.

Can I load a DXF file into MASSO

No, MASSO is a CNC controller and uses only Gcode. You need to write or use CAM software to create your

Gcode

Where can I get a post processor for my CAM software?

MASSO has links to some CAM software post processors in the documentation.

If your supplier is not listed please contact them and ask if they have a post-processor available or if they can

write one for the MASSO CNC Controller.

https://docs.masso.com.au/cam-post-processors

Can I transfer Gcode files from my computer to MASSO over a network?

Yes, MASSO can connect to your computer via WiFi network and by using MASSO Link software.

This will allow you to send files to MASSO, download the tool table from MASSO and monitor

progress and alarms while it is machining.

MASSO Link is available for PC, macOS and Linux https://docs.masso.com.au/getting-started-

guides/machining-with-masso/wi-fi-connectivity

How easy is MASSO to set up?

This is a hard question to answer as it depends on the person doing it and their level of

understanding. To assist with the initial setup we have published quick start guides on each machine

type and other useful subjects. We also have a forum where users can ask questions about their

builds.

MASSO makes things easier as there is no need for the user to source a PC, motion controller and

interface boards, load the software and drivers for each and then troubleshoot for compatibility

issues. MASSO provides all of these in a single package ready for use.

https://docs.masso.com.au/quick-start-guides

Can MASSO be used for equipment other than CNC machines?

Yes. MASSO is an easily programmable controller that has inputs, outputs and precision motor control. If

your application has needs for these functions then MASSO may be suitable. MASSO has the ability to

autoload a program on powerup and run the program in an infinite loop making it suitable for many

applications.

v5.18 - 08 Apr,2021

www.masso.com.au

Page 18 of 477

Содержание G2






























































































































































































































































































































































































































































































Результаты поиска

Содержание G2

Отзывы:

MASSO G2, Документация, Страница: 18 / 477

Результаты поиска

Содержание G2

Отзывы: