Massimo T-BOSS 410, Руководство владельца/оператора

Страница: 97 / 125

T-Boss410
OWNER’S/OPERATOR’S MANUAL 18.0
16. MAINTENANCE
16- 14
Rear Brake

The rear brake is a hydraulic disc type brake which is activated by
the same pedal which activates the front brake system is self
adjusting and requires no maintenance other than periodic checks
of the pads for wear

Pads should be changed when the friction material is worn to
3/64”(1mm).

Inspect the brake disc and pad wear surface for excessive wear.
Checking the brake fluid level
Insufficient brake fluid may let air enter
the brake system, possibly causing the
brakes to become ineffective. Before
riding, check that the brake fluid is
above the minimum level mark and
replenish if necessary. A low brake fluid
level may indicate worn brake pads
and/or brake system leakage. If the
brake fluid level is low, be sure
to check the brake pads for wear and
the brake system for leakage.
The brake fluid reservoir is located under the hood.

When checking the fluid level, make sure the top of the brake fluid
reservoir is level.

Use only the recommended quality brake fluid. Otherwise, the
rubber seals may deteriorate, causing leakage and poor braking
performance.
Recommended brake fluid: DOT 3

Refill with the same type of brake fluid. Mixing fluids may result in a
harmful chemical reaction and lead to poor braking performance.

Be careful that water does not enter the brake fluid reservoir when
refilling. Water will significantly lower the boiling point of the fluid
and may result in vapor lock.

Brake fluid may deteriorate painted surfaces or plastic parts. Always
clean up spilled fluid immediately.

Have an authorized dealer inspect the brake system if the brake
fluid level goes down.