Massimo 700UTV-5 Скачать руководство пользователя страница 43

Страница: 43 / 167

4-19

3. Put the lap portion of the belt low on your

hips. Push down on the buckle end of the
belt as you pull up on the shoulder part
so the belt is snug across your hips.

4. Position the shoulder belt over your

shoulder and across your chest. The
shoulder belt should fit against your
chest. If it is loose, pull the belt out all the
way and then let it retract.

5. To release the buckle, firmly press the

release button.

1. Buckle 2. Release button

WARNING

POTENTIAL HAZARD

Not wearing the seat belt.

Wearing the seat belt improperly.

WHAT CAN HAPPEN

There is increased risk of being killed

or seriously injured in an accident.

HOW TO AVOID THE HAZARD

Always wear your seat belt when riding

in the vehicle.

Be sure the seat belt is close-fitting

across your hips and chest and is

latched securely.

Содержание 700UTV-5








































































































































































Результаты поиска

Содержание 700UTV-5

Отзывы:

Бренды по названию

Популярные бренды

Massimo 700UTV-5, Руководство пользователя

Результаты поиска

Содержание 700UTV-5

Отзывы:

Бренды по названию

Популярные бренды