Warning:
.,.,,,lllll/y,.-ll1lfllllldt:llllllllt!nlllll/Jllallldl:lllltlfblfJI/IJl1111""11t:lltntl.
1. For the difference between the different vehicles, the operation method of rising and lowering the snow shovel will be different.
Please read the ATV/UTV manual carefully and operate according to the vehicle requirements.
2. The snow plough has two skid shoes. Lowering the skid shoes will raise the snow plough and raising the skid shoes will lower the
snow plough. The skid shoes is lifted and lowered by adjusting the upper and lower positions of the limit nuts. After adjusting the
distance between the snow plough and the ground, the limit nut must be tightened.
Refer to the picture 12
3. The blade angle can be adjusted by manual. Press the blade adjuster (16), then turning blade
as
desired. Finally, released the blade
adjuster and locked.
Refer to the picture 13
Press Btacte=adjuste
r
(16-,=
Picture 12
Picture 13
4. The adjustable blade springs can be adjusted to increase or decrease the pivot-tension on the snow blade. Additional
tension may be applied or relieved by tightening or loosening the hex screws on top of the snow blade. To increase
tension, tighten springs, the hook bolts shown in picture 14.
Tension Adjustment bolts
Picture 1
Operating
the Snow
Plow
CD
IMPORTANT:
Adjust the skid shoes
for the surface
being cleared.
Lower the blade to
the surface and
operate the utility
vehicle at
a speed consistent
with size and
condition of the
area being cleared.