27
FEATURES AND CONTROLS
4×2
、
4×4WD and differential locking exchangeable
When select “4X2”, it is rear wheel drive mode (this is the normal driving
mode). When select “4X4”, the front and rear wheels will be drove at same
times( normally, this drive mode will be used on muddy and rugged road.
When select “4X4 lock” mode, it is 4 wheel drive mode and also the front
differential locked (this drive mode only used on very rough road or when
the car got stuck).
Note
:
It will increase the wear and tear when use four wheel drive. Please use two wheel drive
on the normal road. In case to prolong the usage of the vehicle, four wheel drive could only be
used on muddy, slippery, snow or up-slope road.
Warning: 1. Engine is matched with stepless automatic clutch. There is no any
assistant unit in gear changing. So the vehicle must be stopped when change 2WD
from 4WD.
2. The corresponding gear position will be displayed on meter when
change gears. But sometimes this is not the meaning that the gear is in its position.
You just need step on the accelerator pedal lightly, and then the gear will be in its
position. (Please note that better do not step on pedal hard before the gear is in its
position in case to damage the transmission gear
)
.
Содержание 500LUTV
Страница 29: ...21 FEATURES AND CONTROLS Component Locations...
Страница 30: ...22 FEATURES AND CONTROLS Component Locations...
Страница 115: ......