MASSEY FERGUSON MF 9283, Руководство по обслуживанию

Страница: 30 / 31

1.4.4 High pressure leaks
Fluid that leaks from the hydraulic system or the
fuel injection system is high pressure and is not
easily seen. The fluid can go into the skin causing
injury.
Fluid that is injected into the skin must be
surgically removed immediately. If not removed
immediately, infection and reaction can occur. Go
immediately to a physician who knows about this
type of injury.
GUID-CB450E2E-50DF-4D16-9E59-21C0B3E5B026-high.jpg [High]
Fig. 28
Use a piece of cardboard or wood to look for
possible leaks. Do not use your bare hand. Wear
leather gloves for hand protection and safety
goggles for eye protection.
Remove all pressure before you loosen hydraulic
lines. Lower equipment in the up position, close
the accumulator valve, and stop the engine.
Tighten all connections before applying pressure.
GUID-9A83C5CD-95EC-445B-A3A7-1DCF8FACFE45-high.jpg [High]
Fig. 29
1.4.5 Tire safety
Examine tires for cuts, bulges, and correct
pressure. Replace worn or damaged tires. When
tire service is needed, have a qualified tire
mechanic service the tire. Tire changing can be
very hazardous and must be done by qualified tire
mechanic using proper tools and equipment. See
the Specifications Section for the correct tire size.
Tire explosion and/or serious injury can result from
over inflation. Do not exceed the tire inflation
pressures. See the Specifications Section for the
correct tire pressure.
Do not inflate a tire that is seriously under inflated
or has been run flat. Have the tire examined by
qualified tire mechanic.
Do not weld on the rim when a tire is installed.
Welding will make an air/gas mixture that can
cause an explosion and burn with high
temperatures. This hazard applies to all tires,
inflated or deflated. Removing air or breaking the
bead is not enough. The tire must be completely
removed from the rim prior to welding.
GUID-CB65B01E-C8CB-43E0-A943-F2A9567A2E73-high.jpg [High]
Fig. 30
GUID-68111A90-0641-4B8F-9AB9-A5B05A044C46 [V3]
GUID-E28CEEE8-E160-49B0-8080-8D193B1B4E86 [V6]
1. General
1-20 Rotary Disc Header
4283612M1