manualshive.com logo in svg

MASSEY FERGUSON 9695 CE, Руководство оператора

Поделиться
Скачать
MASSEY FERGUSON 9695 CE Скачать руководство пользователя страница 9

700735875 F Rev.  

A-5

SAFETY

A WORD TO THE OPERATOR

FIG. 3:

It is YOUR responsibility to read and understand

the safety section in this manual and the manual for all
attachments before operating this machine. Remember
YOU are the key to safety. Good safety practices not only
protect you, but also the people around you. 

Study the features in this manual and make them a
working part of your safety program. Keep in mind that
this safety section is written only for this type of machine.
Practice all other usual and customary safe working
precautions, and above all REMEMBER - SAFETY IS
YOUR RESPONSIBILITY. YOU CAN PREVENT
SERIOUS INJURY OR DEATH.

This safety section is intended to point out some of the
basic safety situations that may be encountered during
the normal operation and maintenance of your machine.
This section also suggests possible ways of dealing with
these situations. This section is NOT a replacement for
other safety practices featured in other sections of this
manual.

Personal injury or death may result if these precautions
are not followed.

Learn how to operate the machine and how to use the
controls properly.

Do not let anyone operate the machine without instruction
and training.

For your personal safety and the personal safety of
others, follow all safety precautions and instructions found
in the manuals and on safety signs affixed to the machine
and all attachments. Use only approved attachments and
equipment.

Make sure your machine has the correct equipment
needed by the local regulations. 

m

WARNING: An operator should not use
alcohol or drugs which can affect their
alertness or coordination. An operator on
prescription or 'over the counter' drugs
needs medical advice on whether or not
they can properly operate machines.

m

CAUTION: If any attachments used on this
equipment have a separate Operator
Manual, see that manual for other important
safety information.

m

CAUTION: See the engine Operation and
Maintenance Manual for other important
safety information.

m

CAUTION: See the combine Operator
Manual for other important safety
information.

FIG. 3

S-1123

Find manuals at http://best-manuals.com/search?&s=MF-700735875F_LORZ

Содержание 9695 CE
































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды