MASSEY FERGUSON 7200 BETA - 275-335, Брошюра

Страница: 4 / 20

02
03
01
04
A stress free harvest
starts here
Even in the toughest conditions you don’t want reliability problems
in, what is often, a race against time. The MF BETA will quickly earn
your trust with their day-in, day-out consistency and dependability.
The FreeFlow cutting tables on
MF 7260 and MF 7270 BETA
combines are designed for
harvesting a wide variety of crops.
The table consists of a welded
frame to which bolt-on panels
are mounted. These panels, for
example the table bottom plates,
can therefore be replaced easily
when required.
The crop is cut by a high
performance Schumacher knife
and gearbox. It then feeds into a
large diameter table auger that has
feathering fingers along its entire
length, to ensure even distribution
of the crop as it is fed into the main
crop elevator. All reel adjustments
are made using the hydrostatic
control lever in the cab. Automatic
cutting height control is standard
on all machines to optimise table
performance on all types of terrain.
The Agritronicplus monitor is used
to set the table height controls.
PowerFlow
- The powerful choice
Crops like oil seed rape, peas and
rye are difficult to harvest as is laid
wheat and barley. Pioneered by
Massey Ferguson over 30 years
ago, the PowerFlow table has
the ability to tackle these crops
with ease. The knife is a massive
1.14 m from the table auger so
vision and performance are at the
optimum. The rugged powerflow
belts power the crop away from
the knife and into the main crop
elevator at a consistent speed and
no changes are required on the
table when moving from one crop
to another. You can also benefit
from up to a 73% increase in
output when using the PowerFlow
table in oilseed rape rather than
a conventional table; making
PowerFlow the obvious choice in a
variety of crops and conditions.