MASSAGGIO 5903641991223, Руководство пользователя

Страница: 34 / 40

32
Method of usage
·
Hold the front and rear ends of the armrests with both hands, first insert the limit
shaft at the rear end of the armrest into the limit shaft card at the lower end of the
rail steel frame, then push the armrest up slightly and check whether the armrest
limit shaft is inserted firmly (Figure 5) .
·
After inserting the rear end of the armrest, hook the front end of the armrest into
the steel tube of the seat frame and press down the front end of the armrest; then
gently shake the armrest to check whether the front and rear ends of the armrest
are in place (Figure 6).
·
Align the mounting holes on the steel frame at the front end of the fixed armrest,
and then tighten the two M5×14-12.9 black zinc environmentally friendly hexagon
socket head cap screws and a 6×12×1.5 black zinc with the supplied 4# hex
wrench. The eco-friendly flat pad secures the armrest to the frame steel tube
(Figure 7).
·
Use 6 ST4.2*12 screws to secure the rear end of the armrest to the space capsule
(Figure 8).
Limit shaft
Limit block
·
The connector from the rail steel frame is inserted firmly with the armrest
connector, and the air hose connector is also inserted into the position (Figure 3).
·
After connecting with the corresponding connecting lines, gently insert the middle
of the steel pipe in the middle of the guide rail steel frame into the bottom of the
guide rail steel frame, and take care to avoid the tracheal collapse (Figure 4).