Opening The Table
1. Place the table on
its rubber feet, the
handles should be up.
2. Release the table clasps, partially open
the table, and remove the accessories
(
headrest, armrest shelf and two side
armrests
).
3. Open all four legs of the
table to full extension.
Standing The Table Up
While the table is on its side, grab both handles, and place one foot
above the edge of a bottom leg in order to prevent the table from
sliding or folding. Pull the table toward you till the table is tilted
upward.
Once the table is standing, ensure that the table top is flat and the
legs are fully extended.
If the table peaks in the middle, check and straighten out the cables.
Height Adjustment
The proper table height is determined by the therapist’s height,
modality, and technique. You can adjust the height by removing the
grip knob from each leg. Replace the knobs after adjusting each leg to
the desired position.
Ensure all the legs are adjusted to the same level.
