2
Point to be checked on F-type Connector
Output Selector
Example
A bent center conductor may cause short circuit and malfunction.
Center conductor
Center conductor
220V AC
Out 2
Out 1
In
Braided wires
Plug
Center conductor
2mm
Remove every debris, such as chips of the braided
wires, in the connector shell. Even a piece of braid
debris can cause short circuit when it touches the center
conductor, then no picture appears on the TV screen.
●
Use F-type connectors to join the lead-in cable and the booster.
●
To prevent incomplete contact or short circuit, install the plug with care.
●
Use F-type connectors properly-fitted to the cable provided.
If the center conductor is too long, the
terminal part of the F-type connector at
the unit side will be damaged and
cause malfunction.
DEC
., 2011
2K56-524
KW
(B
)·112-
5524
-2T
MASter of PROduction
Booster Unit Installation Gauge (Actual Size)
Horizontal : 72mm
Vertical
: 56mm
Wood screw
The booster unit is usually placed around the TV set,
but can be also installed on a wooden wall.
How to install on a wooden wall
(Accessories)
Wood screw
(Accessories)
1 & 2
Out 1
TV
1 & 2
1
1
Out 1
Out 2
TV
TV
1 Output
Rear View
2 Outputs
Wall outlet
VHF/UHF
Power indicator
Gain control knob
VHF/
UHF
VHF/
UHF
TV
TV
Video recorder
PHONE
: +81-52-802-2211
FAX
: +81-52-802-2200
WEB SITE : www.maspro.net
Attention to short circuit due to braided wires
Specification and design are subject to change due to
upgrades in product quality.
(F-type connectors not included)
Horizontal
Vertical
Wood screw
Wooden wall
(Accessories)
8mm
Gain
power
If wiper phenomenon (vertical bars wiping back
and forth across the screen) occurs, turn the
appropriate gain control knob counterclockwise
until it disappears.
Maximum booster gain is reached when the
knob is turned fully clockwise.
Gain Control Knob
Make sure of the length, 2mm
Straighten the center conductor
When used near an AM radio, the booster may generate noise
in the radio. Use the unit as far apart from the radio as possible.
Attention
