Masport Inbuilt Gas Fireplace
- 11 -
Fig 3.
9) Lower the top panel assembly into place with the
locating prongs pointing down so that they fit neatly
inside the top edges of each side panel. Fasten the
top panel to the fireplace through the two holes in
the lower flange of the top panel assembly.
See Fig 4.
Fig 4.
FLUSH FRONT GLASS
REMOVAL/INSTALLATION
1) Remove the top louvre by lifting it upwards and
outwards to clear the retaining pins.
2) Remove the two trim fastening screws, one at
either end of the top trim as per the diagram below
and remove the top gold trim.
3)
Remove the 2 black cover trims one at either end
of the glass by lifting them upwards and then out.
Pull the top of the trim forward before the bottom.
4)
This will now free the glass for removal from the
fire and give access to the logs, burner etc.
BAY FRONT GLASS
REMOVAL/INSTALLATION
1) Remove the top louvre by lifting it upwards and
outwards to clear the retaining pins.
2) Remove the bottom RH louvre by lifting it upwards
and outwards to clear the retaining pins.
3) Open the LH bottom louver and lift it off it’s hinge.
