Document P/N: 40504-WI-001
REV: A00 CN: 1
st
Issue
Page:
1
of
2
MaskForce Face Mask
Model: MFP01 & MFP02
Manufactured in the U.S.A.
Instructions for Use
INTENDED USE / DISCLAIMERS
:
The MaskForce Face Mask is a general use face mask.
MATERIAL COMPONENTS:
The MaskForce Face Mask does not contain any latex or fiberglass. The following is a list of potential body
contacting materials:
Number
Component
Material
FDA Number
[1]
Strap
Medical Grade Silicone
FDA 21 CFR 177.2600
[2]
Seal
Medical Grade Silicone
FDA 21 CFR 177.2600
[3]
Shell
Medical Grade Polypropylene
FDA 21 CFR 177.1520
[4]
Filter Element
H&V Technostat
[5]
Cap-Lock
Medical Grade Polypropylene
FDA 21 CFR 177.1520
WARNINGS:
Do not use the MaskForce Face Mask in the presence of a high intensity heat source or flammable gas.
The MaskForce Face Mask does not eliminate the risk of contracting any disease or infection. Change
immediately if contaminated with blood or bodily fluid.
STORAGE METHOD:
Store in cool, dry place 40-100º F
CLEANING INSTRUCTIONS:
1.
Fully disassemble the MaskForce Face Mask including the seal, strap, filter element, and Cap-lock.
2.
Clean the MaskForce Face Mask using a soft bristle brush to adequately remove adhering substances
from each component while soaking in a commercially available anionic detergent. Extra attention should
be given to the crevices and cavities during cleaning.
3.
Rinse the MaskForce Face Mask with at least 5 liters of water and air dry out of direct sunlight.
DISINFECTING INSTRUCTIONS:
The filter materials cannot be disinfected using the methods listed.
Replace filter after each use.
Ensure all parts are removed prior to disinfecting the MaskForce Face Mask.
Wipe down all surfaces using Cidex wipes making sure to pay extra attention to the crevices and cavities.
AFTER DISINFECTION:
Inspect all parts for damage or wear; replace any parts that have visibly deteriorated (cracking, crazing,
tears, etc.)
Rinse thoroughly with water and air dry out of direct sunlight. Make sure the MaskForce Face Mask is
dry before use. – follow assembly instructions to reassemble the MaskForce Face Mask
