Masibus DDU-44, Руководство пользователя

Страница: 26 / 36

Model: DDU-TM-44/46 or DDU-44/46
Doc. Ref. no. : - m06c/om/101
Issue no. 04
User’s Manual
Page 26 of 36
6.2.3.8 Stop Bit Set Configuration (STOP):

Press Enter Key to Enter in Stop Bit Set mode, it will enter in View mode and
shows Current Stop Bit on Display.

Press Enter in View mode to enter in Edit mode, in Edit mode Set Stop Bit using
INC and SHIFT Keys, Press Enter key to set the Stop Bit.

In Edit mode it will show two options
1
for 1 Stop Bit and
2
for 2 Stop Bit.
6.2.3.9 Parity Bit Set Configuration (PRTY):

Press Enter Key to Enter in Parity Bit Set mode, it will enter in View mode and
shows Current Parity Bit on Display.

Press Enter in View mode to enter in Edit mode, in Edit mode Set Parity Bit using
INC and SHIFT Keys, Press Enter key to set the Parity Bit.

In Edit mode it will show three options
Odd
Parity,
Even
Parity and
none
Parity.
6.2.3.10 RF Transmit Channel Set Configuration (RF-T):

This Option only available in Wireless Input Model for Retransmission of
Received Signals for increasing the Range.

In Wireless input Model this option is available when in Retransmission
configuration (

.

) you are selecting

or

for Retransmission of Received
Signals for increasing the Range and also selecting receive channel between 0 to 9
except Auto mode in
Rf-r
for RF receive channel set configuration.

Press Enter Key to Enter in RF Transmit Channel Set mode, it will enter in View
mode and shows Current RF Transmit Channel on Display.

Press Enter in View mode to enter in Edit mode, in Edit mode Set RF Transmit
Channel using INC Key, Press Enter key to set the RF Transmit Channel.

In Edit mode it will show
0-9
and no options,
no
option for no re-transmission, It
will stop re-transmission.

When the unit is Transmitting RF Time Frame at that time wireless Tx Led glow.

You can show the RF transmit channel at power on.

If you are select Auto mode in RF receive channel and then after unit power on it
will display RF receive channel which unit previous lock in auto mode.
6.2.3.11 RF Receive Channel Set Configuration (RF-R):

This Option only available for Receiving Signals from Wireless master or Wireless
Re-Transmitter.

Press Enter Key to Enter in RF Receive Channel Set mode, it will enter in View
mode and shows Current RF Receive Channel on Display.

Press Enter in View mode to enter in Edit mode, in Edit mode Set RF Transmit
Channel using INC Key, Press Enter key to set the RF Receive Channel.

In Edit mode it will show
0-9
and
Auto
options.

Auto mode is disabled when you are selecting
RF
and
BOTH
option in
retransmission configuration.

Auto mode is enabled when you are selecting
no
and
ser
in retransmission
configuration.

In Auto mode DDU-TM-44/46 or DDU-44/46 will scan RF channel between
0
to
9
for Receiving RF Signals from Wireless master Time Signal provider.

When unit receive RF Time Frame at that time Wireless Rx Led glow.

You can show the RF receive channel at power on.