Ref No.: m92A/om/101
Issue No.: 15
2 |
P a g e
9000 U
•
9000U Series are rugged 4 wire isolator designed to accept custom-built and
wide range of voltage and current input signals.
Signal is then isolated and
converted to standard instrumentation signals, acceptable to commercially off the
shelf (COTS) automation products.
•
9000U Series offer a wide range of input / output signal types like mA, mV,
VDC which are factory settable as per customer requirements.
•
Built in transmitter power supply (TPS) can drive filed transmitters in case of 4-
20mA DC input signal.
•
9000U Series act as signal distributor when used with more number of outputs.
•
9000U Series are flexible for DIN rail mounting and easily installable.
ISOLATED CONVERTER
9000
U SERIES
Three pot Isolation
Mains / DC operated
DIN Rail / Back panel mounted
Built in transmitter powering
Accepts non-std. signal input
option
Up to four isolated outputs of
different types available
D
IMENSION
F
OR
SOP/
DOP
55mm x 75mm x 110mm
85V-265VAC
45-65Hz
100-300VDC
F
OR
TOP/
FOP
100mm x 75mm x 110mm
S
PECIFICATION
Input
Input Type
Voltage/ Current/ Potentiometric/ RTD(PT100)
Input Range
For Voltage : Min: 0 to ±10mV, Max: 0 to ±600VDC
For Current : Min: 0 to ±1mA, Max: 0 to ±100mA
For Potentiometric : 0 to 10K
Ω
For RTD(PT100): Zero range:-200˚C to 0˚C,
Span range:100˚C to 850˚C
Input Impedance
For Current I/
P
< 51
Ω
; For Voltage I/P > 1 M
Ω
Output
Output Type
Voltage/ Current (Reverse range in output is supported with 9000U)
Output Range
For Voltage : Min: 0 to ±100mV, Max: 0 to ±10VDC
For Current : Min: 0 to ±1mA, Max: 0 to ±10mA/+20mA
Response Time
< 50 ms
Accuracy
± 0.1% of FS / 0.25% of FS in RTD I/P
Output Load resistance
For 0/4mA to 20mA :
≤
750
Ω
For -10mA to +10mA :
≤
910
Ω
For -1mA to +1mA and 0 to 1mA :
≤
9.1K
Ω
For 0 to ±1V :
≥
200
Ω
For 0 to ±5V :
≥
1K
Ω
For 0 to ±10V :
≥
2.7 K
Ω
Auxiliary Output
Transmitter Power Supply 24VDC
Max current Limit: 26mA
Power Supply
Power Supply
85-265VAC 45Hz to 65Hz,100-300VDC / 18-36VDC on request.
Power Consumption
Less than 10VA
CMRR
>100dB
NMRR
>70dB
Isolation
Power to Input / Output, Input to Output, Output to Output –
2.0KV AC for 1 minute
Environmental
Operating temperature
0 to 55ºC
Temp. Co-efficient
≤
100 PPM
Relative humidity
30 to 95% RH (Non-Condensing)
Protection
Conformal Coating on PCB
Physical
Mounting Type
DIN RAIL (35 mm) Mounting
Dimensions
55mm x 75mm x 110mm [For SOP/DOP]
100mm x 75mm x 110mm [For TOP/FOP]
Weight
Less than 250 gm [For SOP/DOP],
Less than 450 gm [For TOP/FOP]
Terminal
Terminal Block
UL,CSA standard
Terminal Cable Size
2.5mm
2
Isolated Convertor
9000 U Series
