Masibus 1008S, Руководство пользователя, Страница: 26 / 39

User Manual 25
Flow Indicator Totaliser 1008S
REF NO: m18A/om/101
Issue No: 17

Password:
A „PASS‟ parameter is added in configuration mode.
But it will always show „0000‟.User has to remember the password .If user needs to
change password, then go in „pass‟ parameter, enter the required password and press
Enter key.
For eg: If user enters „1234‟ in „
pass’
parameter, then, to enter in EDIT mode, a
password „1234‟is to be entered.

Conversion Factor (Conv-F):
It is a constant, which simply divides process value by the factor set. Usually, it is set as
1.00
For example, if process value is 100 liters/minute & conversion factor is 1 then it will
simply integrate process value as it is.
If we change conversion factor = 2, then it will divide process value by that factor i.e.
100/2 = 50 & it integrates that value (in both integral and batch total) but on the display it
shows original process value.

K Factor (K-FA): (OPTIONAL)
Formula for K-FACTOR:
FLOW: - [(Pulse count per second *Time base)/ (K-FACT)]
Where, Time Base value =
For example: - if we want to set FLOW value equals to 250.00 and remaining parameter
at: -

For Flow per minute:
Time base = 2 = 60
Pulse count = 10000
Then FLOW = [(10000 * 60)/2400]
FLOW = 250 per minute.

For Flow per Hour:
Time base = 3 = 3600
Pulse count = 10000
Then FLOW = [(10000 * 3600)/144000]
FLOW = 250 per Hour.
Note: - K-factor works linearly at 60/minute.
For Retransmission
Output, “F.S” parameter is provided.

Clear total :
Parameter to reset IT, BT, and RC.
If user enters the correct password, IT, BT and Roll over count gets cleared (initialized to
Zero). And „cleared‟ message is displayed on the lower window of display. By pressing
ESC key, menu goes back to the clear total. If wrong password is entered, „cleared‟
message will not appear.

Rounding :
This parameter will round the figure of flow rate. It will increase/decrease the flow rate in
multiple of rounding value. E.g. if rounding = 5 selected then flow rate will
increase/decrease by 5, 10, 15….
Select Time base Divisor
0 Second 1
1 Minute 60 (1 x 60)
2 Hour 3600(60 x 60)
3 Day 86400(24 x 60 x 60)