Adjust the Volume on the phone
Press the plus and minus keys for more and less volume. (- +)
Note: These buttons are located below the star, zero, pound (*0#)
•
While the phone is idle the volume keys adjust the ringer
•
While on the handset, headset or speakerphone the volume keys
adjust the volume
Change the Ring Type
To change the ring type
•
Press Menu
•
Press three on the keypad for SETTINGS.
•
Press one on the keypad for BASIC
•
Press four on the keypad for RING TYPE
•
Press the soft key labeled PLAY
•
Press SELECT to choose the one you enjoy most
Missed Calls Alert
The easiest way to clear your missed calls alert
•
When the phone is idle, press the down arrow key.
•
Review the calls if you like
•
Press the soft key labeled EXIT
Headset
See manufacturer for headset use. Once you setup your headset you can set
your phone to go to headset instead of Speakerphione.
•
Press menu
•
Press three on the keypad for SETTINGS
•
Press one on the keypad for BASIC
•
Press one on the keypad for PREFERENCES
•
Press three on the keypad for HEADSET
•
Press one on the keypad for HEADSET MEMORY
•
Press two on the keypad for ENABLED
•
Press the soft key labeled SELECT
•
Press menu
Phone Reboot
Periodically, the phone may require a reboot. Reasons for this include
accepting a new configuration or software upgrade.
There are two ways to reboot the phone:
•
Simultaneously press and hold the Messages, Mute, and both Volume keys (see
illustration) for more than 3 seconds or until a beep is heard and the display
shows “reboot initiated.“
OR
•
Unplug the power supply, wait two seconds and then plug in the power supply
again.
Note:
The reboot process is complete when the idle display is shown with
the time and your extension.
How to Use your IP Phone
Phone Top Features
1-800-942-4700 masergy.com