MASELEC MLA-2
Page 10 of 10
6.5. Mains transformer voltage selection
The mains transformer has a tapped primary to allow operation at nominal voltages of 115V
or 230V. Ensure that the correct voltage range is selected before using the MLA-2.
6.6. Fuse
There is one mains fuse, accessible externally in the IEC320 mains inlet. If this fuse is blown
it should be replaced by a similar value and type.
20x5mm 250V 315mAT (antisurge, slow)
6.7. Earthing
The unit has an internal link connecting the audio ground to the chassis.
A chassis earth stud is provided on the rear of the unit.
6.8. Physical dimensions
Weight: (10lb) (5kg)
Width: 19 inch (483mm) rack-mountable
Height: 2U (90mm)
Depth: 10.25 inches (260mm) add clearance for connectors
7. ELECTROMAGNETIC COMPATIBILITY
This equipment is intended for use in an electromagnetically controlled environment.
To maintain the performance specification it should not be subject to strong magnetic fields
(such as in the immediate vicinity of a power amplifier or cathode ray tube)
This equipment does not include digital circuitry or generate high frequencies that could be
radiated or conducted from the unit.
