CHANNEL
SELECTOR
1
1
5
4
2
3
6
CH.
8
7
5
4
2
3
GR.
6
8
7
¬
-
®
¯
°
±
²
³
WIRELESS
PRODUCT DESCRIPTION
5.2 Handheld Microphone
The handheld microphone operates in UHF band frequency with PLL synthesized control. UHF
64 preprogrammed selectable frequencies to avoid interference. Uni-directional dynamic or
uni-directional condenser capsules with different characters for various choices. Use 1.5V x 2
AA size batteries for low operating cost.
1.
Grille:
Protects the microphone capsule and helps reduce breath sounds and wind noise.
The grille for the various microphone capsules differ in appearance.
2.
Low Battery LED:
LED indicates battery life status. Switching the power to "ON", the LED
flashing once indicates that the transmitter has sufficient power. If the LED stayed on, it
indicates that the battery has insufficient power and should be changed soon. If the status
LED fails to flash, the battery is either dead or not positioned correctly, and you should correct
the positioning or change the battery.
3.
On/off Switch:
Turns transmitter power on and off.
4.
Battery Compartment:
Insert two AA dry or rechargeable batteries into the compartment
and make sure that the polarity of batteries is correct.
5.
Group Selector:
Changes transmitter Group setting.
6.
Channel Selector:
Changes transmitter Channel setting.
7.
Battery Cover:
Unscrew to expose battery compartment and Group/Channel selector.
8.
Color Clip:
This color clip helps to mark the same frequency of receiver and transmitter.
9.
Charging Input:
for charging rechargeable batteries inside the battery compartment using
the using a supplied cable with 1.5
j
DC plugs. It needs up to 10 hours for charging.
Wireless Microphone
´
4
