D C 1 2 V
5 0 0 m A
AU D IO OU TP U T
U N BALAN CED
BALAN C E D
S Q UELCH
o r
FO R
C H AR GER
O
PE
N
WIRELESS
PRODUCT DESCRIPTION
3
4.
Group Button:
Press this button to choose a displayed group number and the setting
group will be locked in 5 seconds.
5.
Channel Button:
Press this button to choose a displayed channel number and the setting
channel will be locked in 5 seconds.
6.
Set Button:
Press this button to choose a displayed group or channel number.
7.
RF Level Indicators:
Five LEDs per RF antenna channel glow to indicate RF signal
strength. The more LEDs that glow, the stronger the received signal. If none of these
LEDs glow, no signal is being received.
8.
Level Control:
This rotary control adjusts the receiver output level to match the input
sensitivity of an audio mixer or amplifier
9.
Antenna:
Fixed-length UHF antenna permanently mounted on rear panel.
10.
Balanced Output:
3-pin XLR connector provides balanced low-impedance output
11.
Unbalanced Output:
6.3
j
phone jack provides unbalanced low-impedance output
12.
Squelch:
The squelch adjusts the output level to suppress the noise. Setting the squelch
too high will reduce the usable range of the system. Set the squelch to minimum before
turning the receiver on.
13.
DC IN:
Input connector for the supplied AC adapter.
14.
Charger Input:
Connect the supplied cable to the receiver and the microphone, and it
takes around 10 hours to recharge and the LED of transmitter is flashing all the time.
15.
Coil Strain:
For the feeder cable of the supplied AC adapter.
Wireless Microphone
Charging Connecting Diagram
Connect the supplied DC1.5 cable to the receiver and the microphone, and it takes around
10 hours to recharge and the LED of transmitter is flashing all the time.
