PRODUCT DESCRIPTION
INTRODUCTION
1
2
Wireless
Wireless
1
2
3
3
4
5
6
7
8
9
Fi g .1 16 c hanne ls mo del
Fr o nt pa nel
Fi g .2 64 c h ann els mod el
Fr o nt pan el
1.
Introduction
Thank you for purchasing our product. This in-ear monitor system operates in
UHF band frequency with Phase Locked Loop (PLL) synthesizer controlled. The
system with 16 or 64 selectable frequencies via PLL circuitry makes it easy to
choose non-interfered channels. Please read this instruction manual carefully before
operating the system. This manual covers the function and operation of the in-ear
monitor system.
2.
Safety
Do not spill liquid on the appliance and do not drop it on a hard surface.
Do not place the appliance near heat sources, such as radiators, amplifier, etc..
Do not expose it directly to sunlight, extremely dust, excessive moisture, or
vibration.
Unplug the power if the appliance has been not used for a long period. This
will avoid the damage resulted by surge electricity.
3.
Feature
IEM-168 is a Low-Power FM broadcasting transmitter. At the same time, it can
send out stereo music (work with CD player, MP3, etc.) and vocal
broadcasting (works with wired or wireless microphone system).
There are up to 16 or 64 selectable channels to set up a multi-channels
broadcasting system and to avoid the frequency inference. Also, the LED
displayer gives us a clear channel indication. And, user can select channels or
groups easily by using rotary switch.
The stereo audio signal (works with CD player, MP3, etc.) can be input easily
through the RCA jack.
The wired microphone can be connected to the 6.3
Φ
jack or to the XLR
connector.
The Peak LED indicator can help avoiding the audio distortion.
User can plug a headphone into the headphone jack on the front panel to
monitor the sending out audio signal.
IEM-168’s antenna is a high efficiency antenna. The service area can be
improved when the antenna is placed at higher location.
IEM-168 can combine with a RF power booster (AB-168, which is 1Watt max)
to used for an over 1 km area service.
4. Product Description
1.
Power: push bottom to power on and push again to power off.
2.
Group Rotary: adjust rotary to select frequency group.
3.
Channel Rotary: adjust rotary to select frequency channel.
4.
Channels LED display: indicate the current channel number. The number
would show up when the power is on.
5.
MIC Volume Control: adjust the volume of MIC input level.
6.
Line Volume Control: adjust the volume of Line In input level.
7.
Monitoring Headphone Volume Control: adjust the volume of monitoring
headphone.
8.
Peak Indicator: indicate the input audio signal is too high and may cause
distortion.
9.
Headphone Jack: 6.3
Φ
headphone jack stereo type.
10.
Antenna Socket: TNC socket for antenna.
11.
MIC IN: 6.3
Φ
/ XLR jack for wired microphone.
12.
Stereo/Mono Switch: switch the stereo or mono mode of audio signal.
13.
Line IN: RCA jack for stereo audio input.
14.
DC Power Jack: DC input connector for the supplied AC adapter.
