6
Working Size (L x W x H):
MSH160: 86 x 42 x 93 CM
MSH160E: 86 x 53 x 93 CM
TROUBLE SHOOTING
SYMPTOM POSSIBLE CAUSES AND CORRECTION
Motor will not start.
·
Check the ON/OFF switch to ensure that it is switched ‘ON’.
·
Check the fuel supply.
·
If a Honda or Robin motor is fitted check the crankcase oil level as an oil sensor device is
fitted to these motors which prevents starting and stops the motor when the oil level is low.
·
Ensure the spark plug ignition lead is connected
·
Check the carburetor jet and bowl to ensure they are clean.
Motor stops
·
Check the fuel supply.
·
Check that the fuel cock is turned on.
·
Check the condition of the air filter.
Petrol Motor lacks power.
·
Check the condition of the air filter.
·
Check the condition of the spark plug.
Insufficient vibration
·
Check for a slipping or a missing vee belt
·
Check that the motor governed speed is 3,200r/min
Machine is not moving freely
·
Check the underside of the plate for a build up of material.
TRANSPORTATION
1. Always shut off engine when transporting machine.
2. Make sure lifting device has enough capacity to hold
machine (see identification plate on machine for
weight).
3. Use central lifting point (a) & (b) when lifting machine.
4. Trolley wheel (c) is used for short distance
transportation.
