8
Ⅳ
LUBRICATION AND SERVICE
●
Check oil levels, wiring, hoses (air, fuel, water) and
lubricate machine daily.
●
Repair or replace all worn or damaged
components immediately.
●
Check drive belt tension, do not over-tension.
●
Make sure machine has full set of matched belts.
●
Check bladeshaft, make sure arbor and threads
are not worn, damaged, or bent.
●
Bladeshaft bearings should be tight, no free play
side-to-side or up and down.
●
Grease blade shaft bearings daily.
●
Blade collars should be clean, free of nicks and
burrs. No diameter wear and not out of round.
●
Drive pin not excessively worn or bent and free of
gouges.
●
All guards in place and secure.
●
All fasteners tight and secure.
●
Air filter/oil filter (hydraulic or engine) clean.
●
Flush clean water through the pump and spray the
assembly every night. This prolongs the pump and
blade life.
Lubricants:
Engine Oil SAE 10W/30
General Grease #1 Lithium
●
Clean machine before starting lubrication
maintenance.
●
Insure machine is on solid, level ground before
starting maintenance.
●
During lubrication maintenance insure strict
cleanliness is observed at all times.
●
To avoid the risk of accidents, use the correct tool
for the job and keep tools clean.
●
The draining of engine oil is best carried out when
the oil is warm NOT hot.
●
Any spilled oil must be cleaned up immediately.
●
Use only clean containers for oil and only CLEAN,
FRESH oils and grease of correct grade.
●
Contaminated Water/Fluids/Oils/Filters Must Be
Disposed of Safely.
Ⅴ
SEPECIFICATION
Motor
MF16-1 Diesel, 186 7.5kw output
MF16-2 Petrol, 188F 9.8kw output
MF16-3 Petrol, Robin EH36D 8.6kw output
MF16-4 Petrol, Honda GX390K1 9.8kw output
Weight
MF16-1 149kgs
MF16-2 126kgs
MF16-3 124kgs
MF16-4 126kgs
Max. Cutting Depth - - - - - - - - 140mm (5.5 in
)
Blade size - - - - - - - - - - - - - 300-400mm (12-16in)
Depth Adjustment Mechanism–Handle Rotation
Driving Mechanism - - - - - - - - - - Manual Push
Water Tank Capacity – - - - - - - - - - - - - - 37L
Ⅵ
WARRANTY
MASLATA products are covered by warranty for a
period of six (6) months from the date of purchase
against defects in material or workmanship
provided that:
·
The product concerned has been operated and
maintained in accordance with the operating
instructions.
·
Has not been damaged by accident, misuse or
abuse
·
Has not been tampered with or repaired by any
unauthorized person.
The owner is responsible for the cost of
transportation to and from the authorized repairer
and the unit is at the owners risk while in transit to
and from the repairer.
