![background image](http://html.mh-extra.com/html/masalta/mdrs65-series/mdrs65-series_instruction-manual_1734808015.webp)
14
Graph 11
5. According to the adjusted neutral position direction, clockwise or counterclockwise
rotate connecting lever end
6. Reconnect the lever end to on the drive shaft with a nut for security protection
7.
Start the engine, increase the engine speed to the maximum. Observe whether the
neutral position has been adjusted
。
8.
If you do not adjust well, stop the engine, remove the nuts and repeat steps 5-7 until
you adjust the neutral position.
9. After adjusting the correct neutral position, fit and tighten the nut of fixed connecting
lever, Then tighten double nut of connecting lever end,.