9
Storage
Rammer should be stored in such position as it is placed on level, after engine and machine have
been cooled down. Be sure to secure the rammer as necessary to avoid falling down. If the rammer
has to be laid down inevitably, tighten fuel tank cap and engine oil plug securely and wait until engine
and machine are cooled down. After laying it down, make sure that there is no leak of fuel or oil. (If
fuel leaks, drain the tank)
Long-Term Storage
Drain fuel from fuel tank, fuel line and carburetor.
Remove spark plug and pour a few drops of motor oil into cylinder. Crank engine 3 to 4 times so
that oil reaches all internal parts.
Clean exterior with a cloth soaked in clean oil.
Store unit covered with plastic sheet in moisture free and dust free location out of direct sunlight.
Specification
Model
MR60R
MR65R
MR75R
EMR75M
Motor
Robin EH09
Robin ER12
Robin EH12-2D
MG165
Power kW (hp)
2.1 (2.8)
2.9 (4.0)
3.0 (4.0)
3.2(4.3)
Operation Mass kg (lb)
60 (132)
65 (143)
75 (165)
74 (163)
Impact Force kN
10.7
13
13.8
13.8
Jumping Stroke mm
50-85
40-80
40-80
40-80
Fuel Tank Capacity l
2.8
2.8
2.8
2.8
Shoe Size mm
335x265
330x285
330x285
330x285
Acoustic Noise
(According to 2000/14/EC)
MR60R
MR75R
MR75R
EMR75M
Measured sound power level
103dB
103dB
103dB
103dB
Guaranteed sound power level
104dB
104dB
104dB
104dB
Sound Power Level Limit
108dB
108dB
108dB
108dB
Working Size
(L x W x H):
MR60R: 710 x 440 x 1060 mm
MR65R: 710 x 440 x 1060 mm
MR75R: 760 x 430 x 1020 mm
EMR75M: 760 x 430 x 1020 mm
