Getting the Kit working
1. Plug the RS232 cable between J2 on the CPU MCAM335x and a PC serial interface (DTE)
2. Download any PC terminal program. Mas Elettronica suggests using Putty (aletrnativity if
you utilize Linux, can use minicom typing from terminal
sudo minicom
).
3. Set PC terminal Software parameters
a. Baud Rate: 115200
b. Data: 8 Bit
c. Parity: None
d. Stop bit: 1
e. Flow Control: None
4. Plug the wall adapter’s pin into the
MDVKIT35P
Power IN jack and to a
120VAC~240VAC power source.
5. Press the power on Button of the
MDVKIT35P.
6. Boot messages are printed within PC’s terminal window.
7. TI Linux shell will appear on the screen after 45 seconds.
Graphical User Interface (GUI)
Test and performance board Tool performance
monitoring system
3D Video demo Configure frequency CPU
and power management
Manage
Application demo for
system and devices board (development
environment Qt)
Pag. 8 of 11
MDVKIT35P Quick Start Guide
Rev. 1.1
