Insert the complete hydraulic cartridge (
5
) into the stanchion.
Insert the rebound spring (
7
), the preload tube (
9
) (
only for models with 130mm travel
) and bushing (
4
)
into the stanchion.
Using the special round-nose pliers, mount the stop ring (
2
) and check it fits perfectly into its groove.
Assembling: Assembling the ETA cartridge
Screw down nut (
1
) without tightening.
Assembling: Reassembling the steering crown unit / arch-slider assembly
A special spanner shall be used to assemble the bottom nuts. Do not, at any times, use other
tools.
Fit both dust seals (
11
) to the stanchions.
© Marzocchi Suspension
2005
-
Z1 FR 1
