Assembling: Mounting the top caps
Put the fork in the vice in vertical position, fixing it by the dropouts.
Assembling: Assembling the top right cap
Check that O-ring is not damaged.
Using the 21mm socket spanner, tighten cap (
2
) to the recommended tightening torque (
10 Nm ± 1
).
Insert spring (
5
) and pin (
4
).
Fit the TST control knob (
3
).
Using the 2mm Allen wrench, tighten screw (
2
) of the TST control knob to the recommended tightening
torque (
2 Nm ± 0.5
).
Restore the correct air pressure (see settings).
Assembling: Assembling the top left cap
© Marzocchi Suspension
2005
-
Marathon XC
