19
Door reversibility
1. Unplug the appliance from the power supply
before carrying out the below-mentioned opera-
tions.
2. Remove the ventilation grill (D).
3. Unscrew the bottom hinge (E).
4. Remove the freezer door by releasing it from the
middle hinge (H).
5. Unscrew the middle hinge.
6. Remove the fridge door by releasing it from the
top hinge pin (D).
7. Remove the pin (D) from the top hinge, then
mount these on the opposite side, after having
removed the plugs (I) which must be refitted on
the other side.
8. Refit the fridge door.
9. Replace the middle hinge to the left hand side.
10.Replace the freezer door.
11.Screw down the bottom hinge (E) on the oppo-
site side by using the screws previously
removed.
12.Remove the plug (F) from the ventilation grill (D)
and replace it on the opposite side.
13.Re-assemble the ventilation grill (D).
The doors can be aligned by adjusting both the mid-
dle and top hinges.
The middle hinge can be adjusted horizontally, with
the help of a tool, after having slackened the two
screws.
The top hinge is adjusted by slackening the nut with
a 10 mm spanner and then proceeding as shown in
the Figure.
Warning:
After having reversed the opening direction of
the doors check that all the screws are properly
tightened and that the magnetic seal adheres to
the cabinet.
If the ambient temperature is cold (i.e.
in Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the
gasket or accelerate this process by heating up the
part involved with a normal hairdrier.
H
E
F
D
F
F
F
D
D590
I
I
I