18
6)
Press “Start robot” button to launch the robot
Robot will go through the testing path (from point A to B) and back five times
-
To pause the movement
– press
“Press to pause”
button while moving
-
To continue the movement
– press
“Press to continue”
button while stopped
-
To stop the movement
– press
“Stop robot”
button
7) Test launch complete. Now, you can build your custom maps and launch the robot
in it
Robots from the first batch (Robot 02 and Robot 03) come with not pre-flashed SW for
stationary Super-Beacons. The initial steps before the test launch:
1) Flash left-side Super-Beacon on the robot via Dashboard (Open Dashboard ->
Firmware -> Upload firmware), press Default button (In the right bottom corner)
and apply following settings:
5
