Marvell MM200-M Скачать руководство пользователя

Страница: 26 / 36

MM200-M MiniCard

Table 11

Protocol Tab Description

Field Description

Power Save Mode

Sets the power mode. Available options are Continuous
Access or Max Power Save. The default setting is Con-
tinuous Access.

Preamble (802.11b)

Sets the Radio Preamble to Auto, Short or Long. This
option takes effect only when attaching to an 802.11b
network.

Transmit Rate

The range of the data rate depends on the type of AP that
the client card is connected to. The default setting is Auto
Select.

Fragment Threshold

Sets the fragmentation threshold (the size that packets
are fragmented into for transmission). The default setting
is 2346.

Region Code

Sets the region code. Available options are FCC (U.S.),
IC (Canada), ETSI (Europe), Spain, France, and MKK
(Japan).

RTS/CTS Threshold

Sets the packet size at which the AP issues a Request-
To-Send (RTS) or Clear-to-Send (CTS) frame before
sending the packet. The default setting is 2347.

Reset

Resets the protocol settings to their default values

3.3 Site Survey Tab

The

Site Survey

tab displays a list of all peer-to-peer (Ad-Hoc) and AP stations within range of the client card.

Figure 29

Site Survey Tab

Содержание MM200-M





































Результаты поиска

Содержание MM200-M

Отзывы:

Похожие инструкции для MM200-M

Бренды по названию

Популярные бренды

Marvell MM200-M, Руководство пользователя

Результаты поиска

Содержание MM200-M

Отзывы:

Похожие инструкции для MM200-M

Бренды по названию

Популярные бренды