10
Before charging, please read the instruction of the "2.3 Use of
Battery" section of the "Safety Guidelines" carefully!
9.0 OPERATION GUIDE
9.1 Pairing
(1). Toggle the power switch of the remote
control to the right to turn on the remote control,
at the same time the remote control will make a
beep, and the power indicator of the remote
control will flash.
(2). Toggle the power switch of the drone to the
right to turn on the drone, and the indicator light
of the drone will flash rapidly at the same time.
1. Plug the USB charging cable into a USB charging port on the computer,
power bank or USB adapter (5V @ 0.5 to 2.0A ).
2. Connect the wire of battery with USB charging cable.
3. Charging time: about 60-70 minutes.
4. The red indicator light on the USB charging cable will turn off when the
battery is under charging; and will turn on when the battery is fully charged.
WARNING
