
10
3 Sales Operation
3.1 Inspection before usage
1. Switch on the scale
2. Make sure that the gradienter hole is clean
3. Anything on the scale pan should be cleared up.
4. Adjust the scale feet until the gradienter bubble showing adjustment to the
horizontal. It is shown below:
5. Make sure that printer paper sufficient and has been correctly installed.
3.2 Power up
Procedure
Key operation and display
1
.
Clean scale pan
2.
Power switch “ON”
ON
3.
Zero indicator lighting up
4. If Zero Indicator not lighting up,
press “ZERO” key
[ZERO]
5.
Stability indicator lighting up
0.000 0.00
Zero
Indicator
Stability
indicator
0.000 0.00
Zero Indicator
Correct
Wrong