Marvel MLDR224 Скачать руководство пользователя страница 15

ENERGY SAVING TIPS

4.  Plug your appliance into a dedicated power circuit. (Not 

shared with other appliances).

5.  When initially loading your new product, or whenever 

large quantities of warm contents are placed within 

refrigerated storage compartment, minimize door 

openings for the next 12 hours to allow contents to pull 

down to compartment set temperature.

6.  Maintaining a relatively full storage compartment will 

require less appliance run time than an empty compart-

ment.

7.  Ensure door closing is not obstructed by contents 

stored in your appliance.

8.  Allow hot items to reach room temperature before plac-

ing in product.

9.  Minimize door openings and duration of door openings.

10. Use the warmest temperature control set temperature 

that meets your personal preference and provides the 

proper storage for your stored contents.

11. When on vacation or away from home for extended pe-

      riods, set the appliance to warmest acceptable tem-

      perature for the stored contents.

12. Set the control to the “off” position if cleaning the 

      appliance requires the door to be open for an extended

      period of time.

13. For wine storage products:

               When serving temperatures are not required, 

               return the compartment(s) set temperature to the

               ideal red and white wine long term storage tem-

               perature of 13°C / 55°F.

The following suggestions will minimize the 

cost of operating your refrigeration appliance.

1. 

Do not install your appliance next to a hot appliance 

(cooker, dishwasher, etc.), heating air duct, or other 

heat sources.

2.  Install product out of direct sunlight.

3.  Ensure the front grille vents at front of appliance be-

neath door are not obstructed and kept clean to allow 

ventilation for the refrigeration system to expel heat.

15

Содержание MLDR224



























Отзывы: