INTEGRATED PANEL INSTALLATION
Integrated Panel Installation
1. Fully open door.
2. Starting at corner, pull gasket away
from door.
3. Continue to pull gasket free from
gasket channel.
4. Upon removal, lay gasket down on a
ÀDWVXUIDFH
5. Partially loosen the 3 screws, securing the top hinge to
the cabinet.
6. Align the panel with the outside edge (opposite the
hinge) and high enough to align with the highest point
in the door.
7. Insert panel underneath top hinge and apply upward
pressure while bringing the lower portion of the
SDQHOÀXVKWRWKHGRRULQVLGHWKHORZHUKLQJH7KH
SDQHOZLOO¿WVQXJJO\
$OLJQGRRUZLWKFDELQHW7LJKWHQWKHWRSVFUHZV
securing the top hinge to the cabinet.
'XHWRGLႇHUHQFHVLQÀRRUFRQVWUXFWLRQRUVXUURXQGLQJ
FDELQHWU\WKHSDQHOPD\QRWVLWÀXVKZLWKWKHWRSRIWKH
door.
Align Panel
Against
Door/Drawe
Edge First
Align Top Of Panel With Highest Point Of Door/Drawer
NOTE
Door
Panel
9. Secure integrated
panel to door/drawer
using clamps. A robust
tape may also be used.
Marvel recommends
the use of bar clamps
to secure the panel to
the door. If using tape,
be certain the tape will
not damage panel
¿QLVKXSRQUHPRYDO
10. Using a 7/64" drill
bit, drill 6 pilot holes into
the wood panel 1/2"
deep using the holes
in the door frame as a
guide.
It is important to ensure that all drilled holes are drilled to
the correct depth in order to avoid splits in the wood when
hardwood is installed.
11. Locate 6 of the #6x 1-1/4" screws provided with your
unit.
th d
/d
f
Wood
Panel
Door/Drawer
Bar
Clamp
Bar
Clamp
NOTE
5
